How To Install Motherboard To Case

Steps Download Article

1

Verify that you are as static free as possible.
2

Open the instance you want to mount the motherboard in.

Advertisement
3

Verify all metal hex nuts are in place to fit the new lath. Make sure none will short whatever solder points on the board.
4

Verify all plastic spacers are in identify to conform the new motherboard.
v

Place the motherboard into the instance.
six

Screw the screws in place to hold the board in identify. Brand sure they are the only matter that line upwardly with the hex nuts...That is the whole purpose of those.

Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizement

Information technology is best to accept all the screws in place and brand sure that the motherboard is properly aligned before you lot tighten down the screws.
Be very careful when placing the motherboard on the hex screws every bit yous can cut or nick one of the circuit traces on the motherboard causing permanent damage.
Don't twist, warp, or flex the motherboard - this can cause permanent damage.
Practise not over tighten screws doing and so can crack the motherboard, tighten them far enough and then that with ane wrist turn of the screwdriver the screws showtime to remove.
Before you do this, you tin can become rid of your static electricity past touching unpainted metallic for 10 seconds. Endeavour using the power supply for this. Information technology is all-time to hold onto that with your other mitt while doing the whole process.

Thanks for submitting a tip for review!

Avoid working on carpeting equally it generates static electricity.
Make sure your hands are dry.
Apply an anti-static strap that is electrically grounded. Straps can be purchased at electronic supply stores and many computer parts dealers.
Do not wear fleece clothing.
There should just be as many hex nuts as there are screw holes to hold the board in place
Do not utilize a magnetic screwdriver.
At no time should yous e'er get out the motherboard/CPU/other components on the ground or on the tabular array. Well-nigh people rest their motherboard on the box it came in. The anti-static bag outside layer is non conductive and is made of the same material as inside the pocketbook so they are a good place to put your raw motherboard.

Cheers to all authors for creating a page that has been read 85,605 times.

Source: https://www.wikihow.com/Mount-a-Motherboard-in-a-Case